Dry Freight Roller Shutters
C4 Lite
The Aluminium Roller Shutter Type C4 Lite stands out for its high stability with low maintenance and comes as an assembly kit, prepared for an easy and quick installation.
Application Field
The C4 Lite Roller Shutter is TÜV certified according to DIN EN 12642 (5600da.N) and can be installed in almost any commercial vehicle body and swap body.
Advantages
> Smooth and silent operation
> Easy change of rollers
> Easy and quick installation/uninstalling of the roller shutter door due to its innovative construction
> TIR qualified due to special hook lock
> Low maintenance construction
> Tailor-made according to your needs
> Recyclable panels
Fabrication
> Panels made of 18 mm aluminium extrusions
> Continuous hinge technology
> Removable roller holder
> Interseals between single panels
> Zinc-plated 2" track system and 2" nylon rollers with zinc-plated shaft
> Bottom and top seal made of EPDM
> Cables made of stainless steel 7 x 7 (1570N/mm²)
> TIR lock
> Header 180 mm
> Manual operation with spring balancer; electric drive also possible
> powder coated to a RAL colour with a gloss level of approx. 80%
RSD XL-25
The Roller Shutter Type RSD XL-25 stands out for its high stability. It has been tested according to EN 12642 Code XL and comes as an assembly kit, prepared for an easy and quick installation.
Application Field
The RSD XL-25 Roller Shutter has been tested according to EN 12642 Code XL (8.100 da.N) and can be installed in almost any commercial vehicle body or swap body.
Advantages
> Precision stainless steel rollers, seated in POM sleeves for a smooth operation in extremely strong
aluminium extrusions
> Easy and quick installation/uninstalling of the roller shutter door due to its innovative construction
> TIR qualified due to special hook lock
> Low maintenance construction
> Low weight, yet high stability
> Tailor-made according to your needs
> Recyclable panels
Fabrication
> Panels made of 25 mm aluminium extrusions with continuous hinge
> Spring balancer ready-to-install, already pre-tensioned
> 1" vertical and horizontal tracks as well as brackets made of hot-dip galvanized 2 mm steel
> Interseals between single panels
> Precision rollers 28 mm made of stainless steel, with bearing
> POM sleeve for roller shafts
> Bottom and top sealing made of EPDM
> Unhook protection with fixation screws
> Zinc-plated hook lock; customs approved, with holder for padlock
> Zinc-plated handle and cable
> Tested according to EN 283 and 12642 XL
> High quality powder coating to any well-established RAL colour with a gloss level of approx. 80%
Alu Plus
The Roller Shutter Type Alu Plus stands out for its high stability and comes as an assembly kit, prepared for an easy and quick installation.
Application Field
The Alu Plus Roller Shutter is TÜV certified according to DIN EN 12642 (4600da.N) and can be installed in almost any commercial vehicle body and swap body.
Advantages
> Precision nylon rollers
> Easy and quick installation/uninstalling of the roller shutter door due to its
innovative construction
> TIR qualified due to special hook lock
> Smooth back side of the shutter in order to avoid freight jamming in the interior
> Low maintenance construction
> Tailor-made according to your needs
Fabrication
> Tailor-made according to your needs
> Double hinge, removable
> Interseals between single panels
> Zinc-plated 2" track system and 2" nylon rollers with long and short shaft made
of stainless steel
> Bottom and top seal made of EPDM
> Cables made of stainless steel 7 x 7 (1570N/mm²)
> TIR lock
> Manual operation with spring balancer; pneumatic or electric drive also possible
> Header 180 mm; with pneumatic drive 100 mm
> Powder coated to RAL 9010
Continental III
The Aluminium Roller Shutter Type Continental III - replacement for the Continental II - stands out for its high stability and its straight-lined design and comes as an assembly kit, prepared for an easy and quick installation.
Application Field
The Continental III Roller Shutter is tested according to EN 283 (6.400 da.N) and can be installed in almost any commercial vehicle body, swap body and in the intermodal transport.
Advantages
> Precision nylon rollers
> Easy and quick installation/uninstalling of the roller shutter door due to its innovative construction
> Rollers can be exchanged without having to remove the panels
> TIR qualified due to special hook lock
> Smooth back side of the shutter in order to avoid freight jamming in the interior
> Low maintenance construction
> Tailor-made according to your needs
Fabrication
> Panels made of 25 mm aluminium extrusions
> Continuous hinge technology
> Removable roller holder
> Interseals between single panels
> Zinc-plated 2" track system and 2" steel rollers with zinc-plated shaft; also available as 1" track
system
> Bottom and top sealing made of EPDM
> Cables made of stainless steel 7 x 7 (1570N/mm²)
> TIR hook lock
> Header 178 mm
> Manual operation with spring balancer; pneumatic or electric drive also possible
> Powder coated to a RAL color with a gloss level of approx. 80%
